DS200


can be shipped within ca. 14 days

295.00
Price without VAT or delivery
Delivery weight: 450 g


  • Diaphragm element
  • Measuring range from 0...50 Pa to 0...6000 Pa
  • 4 calibrated measuring ranges selectable via DIP-switch
  • Alphanumeric LCD display
  • Indication of differential pressure and flow in Pa / m³/h
  • Analogue output signal 0/2...10 V or 0/4...20 mA
  • Supply voltage 15...30 Vdc or 24 Vac
  • Compact plastic housing IP 54; UL 94 HB

 

The differential pressure sensor DS200 is used to measure small differential pressures in ventilation and air conditioning. As transducer a soft silicone membrane is used, which moves under the influence of a differential pressure measuring spring.
 
The DS200 has four calibrated measuring ranges, which can be selected via a DIP switch. A two-line alphanumeric LCD display shows the measured pressure in the physical unit.

In combination with a differential pressure transducer (orifice plate, venturi or pitot tube), the DS200 also directly display the flow in a pipeline. For this purpose, the differential pressure of the differential pressure transducer is square root and multiplied by an adjustable factor of the differential pressure transducer.

A damping of output signal and display, because of fluctuating measured values, can be adjusted in three stages via DIP switches.

The differential pressure sensor DS200 delivers an analogue output signal of 0/2 ... 10 V or 0/4 ... 20 mA. The supply voltage is 15 ... 30 Vdc or 24 Vac.

Range DS200-P2 DS200-P10 DS200-P60
MB1 0...200 Pa 0...1000 Pa 0...6000 Pa
MB2 0...150 Pa 0...500 Pa 0...4000 Pa
MB3 0...100 Pa 0...300 Pa 0...3000 Pa
MB4 0...50 Pa 0...200 Pa 0...2000 Pa

This article has an attractive graduated price for 10/50/100 piece. See link Price reduction.

 

Specifications


Transmitter: air or non-aggressive gas; silicone membrane with transmitter and differential transformer
Lowest range: 50 Pa
Widest range: 6000 Pa
Overload protection: 0,2 bar
Static pressure: max. 0,2 bar
Pressure Connections: hose liners 5 mm ø + 6 mm ø
Housing: ultra mid with hinged lid made of ABS; UL94HB
Electrical Connections: cable entry M16x1,5, protected screw terminals, electronic protected for false polarity
Supply voltage: 15...30 Vdc or 24 Vac ± 15 %
Power consumption: approx. 12 mA (bei 24 Vdc)
Output: 0/2...10 V 3-wire technology switchable via jumper to 0/4...20 mA
Characteristics: linear for pressure measurement or square root when flow measurement
Display: double spaced alphanumeric LCD display, 2 x 16 digit
Absorb ability: adjustable in 3 levels
Ambient temperature: -10...+50 °C
Weight: approx. 250 g
Operating position: vertical, position sensitivity when turned by 90° about 25 Pa
EMC: tested according EN 61000-6-2, EN 61000-6-3, CE mark

 

Additional product information

manual Download
data sheet Download

Accessories

Product Note Status Price
Mounting set
13.00 € *
Delivery weight: 165 g
* Prices without VAT or delivery
Display accessory details

Customers who bought this product also bought

Mounting set
13.00 *
Delivery weight: 165 g
Peritact 80
269.00 *
Delivery weight: 1.9 kg
DA2000-K
210.00 *
Delivery weight: 1,300 g
Delivery weight: 10 g
* Prices without VAT or delivery

Browse these categories as well: Indicators and sensors for differential pressure, Home page