- Diaphragm element
- Smallest measuring range 0...50 Pa
- Backlit LCD display with 4 lines of 20 characters
- Analog output 0...10 V and 4...20 mA
- 2 switching output signals potential free
- Switching function min. or max.
- Supply voltage 230 Vac, 24 Vac or 24 Vdc
- Protection class IP 65
Gauge with diaphragm element for indication, monitoring and transmission of measured values of pressure, vacuum or differential pressure of non-aggressive gases. Also for air flow measurement after the effective pressure or dynamic pressure system with square-root characteristic.
Specifications
Smallest measurement range: 50 Pa
Largest measurement range: 10.000 Pa
Selected measuring range: as desired, ± range e.g. -50...0...+50 Pa extra charge (as far as technical possible)
Overload protection: 0,2 bar
Static pressure: max. 0,2 bar
Pressure Connections: hose liners 8 mm ø
Electrical Connections: screw terminals
Cable entry: 3 x M16 x 1,5
Supply voltage: 230 Vac, 24 Vac or 24 Vdc
Power consumption: approx. 1,5 VA
Analogue output: 0/2...10 V and 0/4...20 mA
Characteristic line: pressure - linear, volume - to square root, linear or to square rooted
Electrical absorption: adjustable 0, 1, 2, 4, 8, 16, 32 s
Switching output: 2 potential free switching contacts
Switching function: min. or max. for each contact
Contact load: 250 Vac, 8 A non-inductive load
Switching delay: adjustable 0...20 s
Display: lighted LCD-Display, 4 line, 20 digit
following values are displayed:
1. line: pressure - actual value with unit
2. line: pressure - actual value as analogue bar
3. line: adjusted limit value (arrows)
4. line: adjusted limit value (digital)
Wall mountable housing: Ultra mid/ABS, black/grey
Protection class: IP 65
Ambient temperature: -10...50 °C
Weight: approx. 900 g
EMC: tested according EN 61000-6-2, EN 61000-6-3, CE mark
Tolerance: ± 1 %
